Tempsens has always tried to anticipate and accommodate customer’s needs in temperature measurements. To this end
Tempsens has commenced new “Calibration Center”. Temperature calibration lab has highly stable calibration furnaces, measuring instruments and accurate master sensors traceable to National and international Standards. The calibration center functions as per ISO17025/NABL standards. Calibration of contact type sensors can be made in tem. Range of -20°C
to 1200°C. Calibration of non contact type sensors can be made in temperature. Range of 50°C to 1500°C.
High Accuracy Imported Calibrated Master Sensors: Wide range of calibration equipments- set of Dry blocks, Liquid baths along with very accurate temperature indicators.
Trained Staff:
Undertaken intensive internal and external training.
Simple Temperature Calibration
Software:
Dedicated simple and cost effective
temperature calibration software which support Tempsens Calibrators.
Computerized Automatic Calibration Report: A proprietary software is used to generate reports cross checks various fields in the calibration record. When calibration certificates are issued the instruments and the sensors are tested against precise standard parameters
regarding the measuring accuracy.
On site calibration- for contact and non contact temperature sensors. Our engineers help customers to provide fast and
accurate calibration with lowest down time.
Calibration Seminars / Training::
Provide training and consultancy for temperature solution to cater needs of
customers.
Continual Innovation:
Upgradation of system & solution continually
SCOPE OF ACCREDITATION (Permanent Facility)
S.#
Parameter Measured
Range
B.M.C
Instrument Used
1.
Contact Type Temp Sensors (Thermocouples, RTD's, Digital Temp, Indicator, Thermometers)
-38....250 °C
250....500 °C
500....1000 °C
1000....1200 °C
1200....1500 °C
±0.10 °C
±0.14 °C
±1.30 °C
±2.10 °C
±4.20 °C
Using Digital Thermometer, PRT & SPRT with Alcohol,HART Scientific and Oil Bath
Using Digital Thermometer, SPRT with Dry Block Bath
Using Digital Thermometer, PT/PT-RH T/C with Dry Block Bath
2.
Non-contact Infrared
Pyrometers
50....
250 °C
250.... 400 °C
400....500 °C
500....800 °C
800....1000 °C
1000....1200 °C
1200....1500 °C
±0.40 °C
±0.90 °C
±2.60 °C
±2.70 °C
±3.20 °C
±4.00 °C
±5.80 °C
Using Digital Thermometer, PRT with IMPAC Black Body
Using DMM, IMPAC Standard Pyrometer with LAND Black Body and IMPAC Black Body
SCOPE OF ACCREDITATION (On Site Facility)
S.#
Parameter Measured
Range
B.M.C
Instrument Used
1.
Contact Type Temp Sensors
(Thermocouples, RTD's, Digital Temp, Indicator,
Thermometers)
-25....140 °C
140....500 °C
500....1000 °C
1000....1200 °C
±0.11 °C
±0.14 °C
±1.30 °C
±2.20 °C
Using Digital Thermometer, PRT & SPRT with HART Scientific and Oil Bath
Using Digital Thermometer, PRT & SPRT with Dry Block Bath
Using Digital Thermometer, PT/PT-RH T/C with Dry Block Bath
2.
Non-contact
Infrared Pyrometers
50....
250 °C
250.... 400 °C
400....500 °C
500....800 °C
800....1000 °C
1000....1200 °C
±0.60 °C
±1.00 °C
±2.40 °C
±2.70 °C
±3.20 °C
±4.00 °C
Using Digital Thermometer, PRT with IMPAC Black Body
Using DMM, IMPAC Standard Pyrometer with CALsys Black Body and IMPAC Black Body
COMMISSIONING
A
team of qualified engineers is available to assist in the
commissioning of all Tempsens temperature measuring products
where required. Commissioning is a very important aspect of
satisfactory and long term performance, particularly where
continuity of the production process depends on the reliability
of the system. Product servicing is also available to help
maintain optimum performance from Tempsens products.
QUALITY ASSURANCE
In order to comply with today's demands of ISO requirements of traceability in all aspects of Quality assurance, Tempsens have recognised the need to provide a quality backup service as well as quality products. As a result of our commitment to quality the Tempsens Instruments International Quality Management System is approved to ISO 9001:2000.
THERMOGRAPHY SERVICES
Thermography services are provide for predictive and preventive analysis in all types of industries. Our team of thermography experts provide on site analysis with the customer.
Infra-red Thermal imaging (non-contact measurement of temperature) is the only temperature tool that can not only predict a failure effectively but also understand the root imperfections properly. The report of such analysis are provided to the customer for taking up the corrective actions based on the severity of the problem.
INSTRUMENTATION AND AUTOMATION CONSULTANCY
Our experience of three decades in instrumentation and automation provides us a unique experience in this field. Our experienced team of engineers provide the solution for your automation needs.
We also provide training specifically for temperature instruments, its use and selection. These trainings can be either provided at our works with full working models or at your site.
Thermocouples
A
team of qualified engineers is available to assist in the
commissioning of all Tempsens temperature measuring products
where required. Commissioning is a very important aspect of
satisfactory and long term performance, particularly where
continuity of the production process depends on the reliability
of the system. Product servicing is also available to help
maintain optimum performance from Tempsens products.
In order to comply with today's demands of ISO requirements of traceability in all aspects of Quality assurance, Tempsens have recognised the need to provide a quality backup service as well as quality products. As a result of our commitment to quality the Tempsens Instruments International Quality Management System is approved to ISO 9001:2000.
Thermography services are provide for predictive and preventive analysis in all types of industries. Our team of thermography experts provide on site analysis with the customer.
Our experience of three decades in instrumentation and automation provides us a unique experience in this field. Our experienced team of engineers provide the solution for your automation needs.
We also provide training specifically for temperature instruments, its use and selection. These trainings can be either provided at our works with full working models or at your site.
